Supply, delivery and installation of signage

CfQ_IN03_MEUSAC-2021_Signage
CALL FOR QUOTATIONS
for the supply, delivery and installation of signage

MEUSAC is seeking a reputable service provider for the supply, delivery and installation of signage.

Information on the terms and conditions together with the services to be provided can be obtained from the Call for Quotations Dossier.

The contract will be awarded to the cheapest technically compliant quotation.

Proposals are to follow the format requested in the attached dossier and are to be addressed to info.meusac@gov.mt, titled ‘Request for Quotations for the supply, delivery and installation of signage’ (CfQ_IN03_MEUSAC-2021_Signage) by not later than 10.00 hrs CET of March 3, 2021. Late submissions will not be considered.

 



CLARIFICATIONS

Question 1

With reference to item 1

Printing in full colour, high resolution (not less than 300dpi) of branded stickers
to be affixed at the back of existing, transparent Perspex signs:

  • Two (2) stickers, each measuring 360mm by 310mm;
  • One (1) sticker, measuring 380mm by 130mm;
  • Four (4) stickers, measuring 360mm by 150mm;

Kindly can you provide us with the photos of each sign in order to understand the time required for cleaning the existing sticker.

Our main concern when removing the stickers is that if a sticker had been installed for a long period of time the glue marks can be still seen while pilling off the sticker since perspex is a very fragile item it can be damaged and or tempered. Thus we suggest considering that the signs are respectively small to change them. Should our proposal is acceptable as per of the works it should be included that the signs are to be made exactly with the same hole position and please also indicate the thickness of the sign.

Answer 1

Photos of each sign are being attached, as follows:

  • Two (2) stickers, each measuring 360mm by 310mm – Photo 1;
  • One (1) sticker, measuring 380mm by 130mm – Photo 2;
  • Four (4) stickers, measuring 360mm by 150mm – Photo 3 and Photo 4.

Thickness of signs is 5mm.

The Contracting Authority finds no objections in being provided with new signs having exactly the same hole positions, as long as the final product meets the quality being requested.

« Back